New in the Neighborhood

Blog

Buying new construction

What Comes Standard in a New Central Austin Home (and What the Spec Sheet Means)

Spray foam, tankless, Low-E, SEER2: a new-home spec sheet is full of terms that sound like upgrades. Here's what's typically standard in a new central Austin infill home, what the terms mean, and what to ask about.

By Matt van Winkle · November 9, 2026

Placeholder photo

A new central Austin infill home comes with more as standard than most buyers expect, partly because builders compete on finishes and partly because Austin's building code requires a lot of what used to be optional. Energy-efficient windows, a sealed and insulated envelope, LED lighting, and a wiring setup ready for an electric vehicle charger are code now, not upgrades. What varies from builder to builder is the finish level: counters, flooring, appliances, fixtures, and the yard.

Here's what's typical, what the spec-sheet terms mean in plain language, and where the line between standard and upgrade usually falls.

What the code requires

Austin builds to the 2024 International Residential Code and 2024 International Energy Conservation Code with local amendments, effective July 10, 2025. The City's building technical codes page lists what's in force. For a buyer, that means every new home permitted since then has to meet current standards for insulation, air sealing, window performance, lighting efficiency, mechanical ventilation, and electric vehicle charging infrastructure. An older house, even a nicely remodeled one, doesn't have to meet any of that.

The practical result is that the invisible parts of a new home, the parts that decide your utility bill and your comfort in August, are good by default. The visible parts are where the builder's choices show.

Spec-sheet terms explained

Spray foam insulation. Foam sprayed into wall cavities and the underside of the roof deck, where it expands and seals gaps. Open-cell foam is softer and cheaper; closed-cell is denser and adds some structural stiffness and moisture resistance. Either one, applied at the roof, creates a conditioned attic, which means your HVAC equipment and ductwork sit in cooled space instead of a 140-degree attic. Very common in central Austin new construction.

Radiant barrier. A reflective layer on the underside of the roof decking that reflects heat away from the attic. Common in Austin for years and often paired with, or replaced by, spray foam at the roofline.

Tankless water heater. Heats water on demand instead of storing it in a tank. Takes up less space, lasts longer than a tank, and never runs out, though it can take a few seconds longer to reach the tap. Gas tankless units are the norm when gas is available; electric tankless or heat-pump water heaters show up in all-electric homes.

SEER2. The efficiency rating for air conditioners under the current federal test standard. Higher is more efficient. Variable-speed or two-stage systems, which run at lower speed most of the time instead of cycling on and off, are increasingly standard in homes at central Austin price points.

Low-E, double-pane windows. Two panes of glass with a thin metallic coating that reflects heat while letting light through. Required by code. Black aluminum or fiberglass frames are the common look on new infill homes; vinyl is less common in this price range.

ERV or fresh-air ventilation. A tightly sealed house needs a way to bring in outside air. An energy recovery ventilator (ERV) does that while transferring heat and humidity between the incoming and outgoing air. Some builders use a simpler fresh-air intake tied to the HVAC system instead.

Engineered hardwood. A thin layer of real wood (white oak is the current favorite) bonded to a plywood core. More stable than solid wood over a slab foundation, which is why nearly every new central Austin home uses it.

Quartz. An engineered stone counter made of ground quartz and resin. Harder and less porous than marble or granite, and the default counter in most new homes. Marble, quartzite, and porcelain slab are usually upgrades.

EV-ready. Wiring and a dedicated circuit for an electric vehicle charger in the garage or at the parking space, so adding a charger later doesn't mean opening walls. Required in new construction under Austin's 2024 code amendments.

What's typically standard, and what's usually an upgrade

Standards vary by builder and by price point, so treat this as a starting point and ask for the builder's written list.

An allowance means the builder has budgeted a set amount for an item (lighting fixtures, for example) and you choose within it or pay the difference. Ask what the allowances are and whether they're realistic for the look in the listing photos.

Questions to ask before you sign

The answers tell you two things: what you're getting, and how organized the builder is. A builder who hands you a clear, written list has probably built the house the same way. Our post on warranties and inspections covers how to verify the work behind the walls.

See the new homes for sale in central Austin, or join First Look to hear about new homes as soon as we know about them, often before they're listed.

No items found.

Matt van Winkle

Realtor, New in the Neighborhood at Compass

Matt van Winkle is a Realtor with Compass and the founder of New in the Neighborhood, a service for people buying and selling newly built homes in Austin's established central neighborhoods. He has sold more than 400 homes since 2009 and previously served as CEO of RE/MAX Northwest, growing it to more than 700 agents across 16 offices. He writes about new construction with the same focus he brings to clients: what the numbers say, how the process works, and what to check before you sign.

Looking for a new home in central Austin?

Tell us what you need and we'll send you new homes before they're listed, including ones still being built.

Get first look